EAS-2 Labeller - BLEMA Kircheis MAJER

Overview

A convolute label is glued to a spiral-wound tube of approx. one meter in length with the labelling machine; the labelled tube is then cut to the finished length of the can body.

For machine type EAS-2, glue application is carried out on the label using a drum.

Process

Tube is pushed onto mandrel by means of mechanically operated pusher.

A pivoting suction rail takes the labels from the stack and transfers them to a continuously rotating cylinder for gluing.

From a double-roller gluing system the label sheets receive a full surface gluing.

Glued label is rolled under tension onto the raw tube, free of wrinkles or bubbles.

Dividing of tubes with high quality by mechanical dividing knives with air cushion.

The finished tubes are mechanically stripped-off the mandrel. The trim rings are removed by a sucking device (optional).

Layout

A – elevator

B – storage section

C – labelling machine

D – dividing machine

E – pusher

F – off-transport

G – not applicable

H – stand-up device

I – 90° - sheet transport belt (optional)

J – vacuum pump

K – pneumatic connection

L – control cabinet

M – movable suction unit (optional) on the control panel

Design and Function

Machine for the precise labelling and distribution of prefabricated cylindrical raw tubes made of paper for the manufacturing of composite cans.

raw tubes are fed from a single knife cutter to the EAS-2 via conveyor, hopper and elevator
extremely rigid four-station indexing turret with precision mandrels

Label feeding and gluing

feeding of labels in sheet form
machine is equipped with two label stacking tables, one of which can be used for refilling
thus a very fast stacking of labels is possible (short production interrupt times)
circumferential speed of the tube can be regulated continuously during labelling
continuous control of the label during transport from the stack to the labelling (no change in position)
accurate labelling
mechanical stripping of the finished tubes from the spindle
automatic suction device for waste rings (optional)

Technical Data

	EAS-2
performance	max. 40 Takte / min.
tube diameter	Ø 40 ... 116 mm
tube wall thickness	0,5 ... 2,5 mm
raw tube length	500 ... 1.005 mm
tube eff. working length	max. 990 mm
no. of knives	max. 15
label - width	500 ... 1.000 mm
label - height	134 ... 372 mm
label - grammage	80 .. 110 g/m²
mass - divider	1.700 kg
mass - labeler	1.000 kg
mass - feeder / elevator	600 kg
mass - upender	300 kg
mass - switch cabinet	400 kg
drive power	6 ... 8 kW
pneumatic connection	6 bar